2011 BMW K1300R

2011 BMW K1300R

2011 BMW K1300R

Type Water-cooled 4-stroke in-line four-cylinder-engine, four valves per cylinder, two aerial camshafts, dry sump lubrication

Bore x achievement 80 mm x 64,3 mm

Capacity 1.293 ccm

Rated achievement 129 kW (175 hp) at 9,250 rpm

Max. torque 140 Nm at 8,250 rpm

Compression arrangement 13,0 : 1

Mixture ascendancy / engine administration Electronic assimilation aqueduct injection/digital engine administration including beating sensor (BMS-K)

Emission ascendancy Closed-loop 3-way catalytic converter, discharge accepted EU-3

Maximum acceleration Over 200 km/h

Fuel burning per 100 km at connected 90 km/h 4,7 l

Fuel burning per 100 km at connected 120 km/h 5,3 l

Fuel blazon Unleaded premium, octane amount 98 (RON), automated beating ascendancy permits operation with minimum octane amount 95 (RON).

Alternator three-phase alternator 580 W

Battery 12 V / 14 Ah, maintenance-free

Clutch Multiple-disc clamp in oil bath, hydraulically operated

Gearbox Connected cobweb 6-speed gearbox

Drive Shaft drive

Frame Bridge-type frame, casting aluminium, load-bearing engine

Front caster area / abeyance BMW Motorrad Duolever; axial bounce strut

Rear caster area / abeyance Casting aluminium single-sided beat arm with BMW Motorrad Paralever; axial bounce strut with batten system, bounce pre-load adjustable hydraulically (continuously variable) at handwheel, adjustable backlash damping

Suspension biking foreground / rear 115 mm / 135 mm

Wheelbase 1.585 mm

Castor 104,4 mm

Steering arch bend 60,4В°

Wheels Casting aluminium

Rim, foreground 3,50 x 17"

Rim, rear 6,00 x 17"

Tyres, foreground 120/70 ZR 17

Tyres, rear 190/55 ZR 17

Brake, foreground Twin disc, amphibian anchor discs, bore 320 mm, 4-piston anchored calipers

Brake, rear Single disc brake, bore 265 mm, double-piston amphibian caliper

ABS Accepted equipment: BMW Motorrad Integral ABS (part-integral)

Length 2.182 mm

Width (incl. mirrors) 905 mm

Height (excl. mirrors) 1.221 mm

Seat height, unladen weight 820 mm (low seat: 790 mm)

Inner leg curve, unladen weight 1,810 mm (low seat: 1,750 mm)

Unladen weight, alley ready, absolutely fuelled 1) 254 kg

Dry weight 2) 228 kg

Permitted absolute weight 460 kg

Payload (with accepted equipment) 206 kg

Usable catchbasin aggregate 19 litres

Reserve approx. 4.0 litres

1) According to guideline 93/93/EWG with all fluids, fuelled with at atomic 90% of accessible catchbasin volume

2) Unladen weight after fluids